NAIL PULLERS & PRYBARS

Effective and easy to use, SharkGrip Japanese "cat's paw"-type nail pullers are the choice of professional cabinetmakers and woodworkers. A genuine SharkGrip nail puller is a "must-have" for every tool kit.

Forged from the finest heat-treated Japanese steel, SharkGrip nail pullers and prybars can be sharpened, and burrs removed, with a fine-quality steel file.  Nail-pulling and prying ends are double-tempered for added strength. The pulling "V" is hardened to Rockwell 50-52 hardness, then hand-finished for accuracy.

PULLS GUN NAILS!

Designed to grip the shank of the nail, not the head

Sharp "V" blade bites and pulls
embedded or headless nails

Bites at any part of
nail shank

No additional
leverage needed

Ultra-thin blade
for prying

SHARKGRIPcatalog.pdf (Right click and choose "Save link (target) as") file size 360k

Nailset Nailset 6-1/4" 3/32 pt. (#21-2301)
SharkGrip prybars are combination prybars/nail pullers, great for prying off molding with virtually no damage. Extremely thin, they slide into narrow cracks and are perfect for aligning windows and doors during installation or removing carpet strips and staples. They also double as a scraper to remove old paint and smooth rough surfaces.
Prybar 8 Prybar 8" (#21-2220)
Prybar 10 Prybar 10" (#21-2225)
MoldingPro MoldingPro 10" (#21-2325)

Pneumatic nails often have weak heads, but SharkGrip nail pullers pull from the shank. The tool's hardened "V" takes a positive bite into the nail's shank for easy removal. The puller's curved underside easily slides under an embedded nailhead or onto the nail's shank. The back of the puller doubles as a striking head for your hammer. 

Nailpuller 6-1/4"

(#21-2016)

 Finish Nail: 2 penny (1") to 5 penny (1 3/4")

Nailpuller 7-5/8"

(#21-2020)

 Finish Nail: 3 penny (1 1/4") to 6 penny (2")

Nailpuller 9"

(#21-2023)

 Finish Nail: 3 penny (1 1/4") to 7 penny (2 1/4")

Nailpuller 10-1/4"

(#21-2026)

Finish Nail: 6 penny (2") to 10 penny (3")

Common Nail: 6 penny (2") to 16 penny (3 1/2")

Nailpuller 11"

(#21-2028)

Finish Nail: 6 penny (2") to 10 penny (3")

Common Nail: 6 penny (2") to 16 penny (3 1/2")

Nailpuller 11-3/4"

(#21-2030)

Finish Nail: 8 penny (2 1/2") to 10 penny (3")

Common Nail: 6 penny (2") to 16 penny (3 1/2")

Nailpuller 14-1/8"

(#21-2036)

Finish Nail: 10 penny (3") and up

Common Nail: 6 penny (2") to 16 penny (3 1/2")